Skip to content

Shield studio pottery

Stoneware pottery

Home
Instagram Feed
Shop
Building a gas kiln
Blog
Contact

Shield studio pottery

shieldstudiopottery

http://www.shieldstudiopottery.com/

Great to see another cousin of my design on fire.

Great to see another cousin of my design on fire. Great job @johanneskaarakainen wishing you many successful firings with it 👍💫 for those who are interested in building your own visit my website and read ‘building a gas kiln’ 💫🔥

Wood firing face! We are done for the years wood f

Wood firing face! We are done for the years wood firing with @oxforduniversitykilns it feels like a very long time to wait for opportunities to go again next year. It’s good to be patient and work it out slowly, it ought to be like a box of chocolates you wait for until you can’t wait any longer. Our crew fired 2 fast fires in Feb/Jun/Sep and some of the results were off the chart amazing. It is such an addictive draw to improve - to experiment further, to network, to help, to experience, to be part of it all. Sincere thanks for the hard work to establish such a cohesive, inclusive movement in this space by @oxforduniversitykilns 👍💫💪

Morning light over the pots. Celadon, chun and shi

Morning light over the pots. Celadon, chun and shinos. ES80/ES5 and V9g. Fired at @oxforduniversitykilns with @robinwaldenceramics @neilhotchin and @imogen_charleston_ceramics

Fresh work. Subtle pastel tones and peachy blushes

Fresh work. Subtle pastel tones and peachy blushes delivered from the fast fires at Wytham @oxforduniversitykilns Firing crew line up: @robinwaldenceramics @neilhotchin and @imogen_charleston_ceramics 🔥💫

Leach celadon on ES80 fired with @oxforduniversity

Leach celadon on ES80 fired with @oxforduniversitykilns with @robinwaldenceramics @imogen_charleston_ceramics @neilhotchin tolerances are tight on the lids and that’s ambitious with wood firing. Pleased to say they got away with it. Photos in Svend Bayer kiln 🔥

Can you see faces in the flames 🔥

Can you see faces in the flames 🔥

Soaking around 1250 now as the cone packs soften.

Soaking around 1250 now as the cone packs soften. Not long now 🔥

Firing this weekend with @oxforduniversitykilns it

Firing this weekend with @oxforduniversitykilns it’s a heady mix of teamwork, hardwork, woodwork. You know it’s working when four individuals bring a load of pots each and just 3 are left over after stacking. The loose arrangement of small and medium pots means the stack can be really efficient and LOADS more pots can go in as a result. @imogen_charleston_ceramics has the ‘plate shel’ this time so watch this space. ‘Christmas eve’ excited, 🤩. With thanks to @robinwaldenceramics for all the generosity of knowledge transfer, thanks to @neilhotchin for the muscle with the trailer today. 🔥 with enormous thanks to @robin.a.wilson enabling us and all the potters on the site, massively appreciated , a herculean effort. @oxforduniversitykilns #oxforduniversitykilns #woodfiring

Proud moment. Towering over the little pots being

Proud moment. Towering over the little pots being prepared for wood firing this weekend is the Jarre a la corde with the rope and armature removed. There were two patches where the body thickness was very thin and being well adhered to the rope broke through when removing the rope, however, I trust my repair will adequately patch, they are invisible from the outside. Another learning to chalk up. This is about a bag of clay, so 12 kilos or thereabouts - wet. For the scale of the piece it feels very light - even at this soft end of leather hard stage. I do hope it makes it. For those who crossed their fingers for me - thank you, that worked. ‘Shield’ studio shadows to die for #jarrealacorde

Jarre a la corde. Third attempt. Thanks to @tom_de

Jarre a la corde. Third attempt. Thanks to @tom_demeranville for v9g clay suggestion. Same as last attempt except addition of propane and experience. I have paid the penance of the reclaim task with slight benefit of a stiffer mix. Cross everything for me 😅

This answers the ‘is it too soon to take the rop

This answers the ‘is it too soon to take the ropes out’ question then 🤦‍♂️

Jarre a la corde. Very satisfying to get to this s

Jarre a la corde. Very satisfying to get to this stage after a failure on the first attempt. @motylpottery you are so generous with your experience and I’m so very grateful for you passing on the knowledge. This pot will just fit in my kiln and will be the largest piece I can fire. It may well deliver a few learnings still and perhaps I’ll need to start again (again), but I’m loving the journey and determined to make a large piece in this way. If you are familiar with this technique do let me know when I should take the ribs and rope out 🤣😅 #jarrealacorde #bigpots

Preparations continue for end of Sept wood firing.

Preparations continue for end of Sept wood firing. It’s a balance between freaking out I’ve not enough and taking time and care about what I do make. Very happy with these boxes so far, I’ve learnt that thickness is required for minimal distortion, I’m hoping a middle to back position in the chamber to shelter them somewhat and am considering using the horizontal nature of the lid in combination with the melt for something a little special, watch this space 💫

A little cremant to celebrate 21 years marriage to

A little cremant to celebrate 21 years marriage to @nikkishield_artist can’t do it without you hon xx with thanks to @lizodwyer and @davidmasonpottery for ceramic excellence to serve it in 💫💫

And so the cycle starts again. The motivation of h

And so the cycle starts again. The motivation of having a firing at the end of Sept is fabulous, such a great focus. The inspiration of past pieces and successful glaze/clay/kiln placement combos is bubbling in my mind. I made today, ES5 just a very short run, but with intent and a yearning for that raw clay blush delivered by wood fire. Almost there with the wood, about 90% probably, found a great new source 💫

I’ve been reflecting on @celebratingceramics tod

I’ve been reflecting on @celebratingceramics today as the dust starts to settle. I really enjoyed my time there, it was well organised and the feeling at @waterperrygardens is relaxed and feels like home. I met so many interesting makers and engaged with so many interested people, it was a heady melting pot of creativity. Tent neighbour @garryjonesceramic was a total legend, if you aren’t following him you should, pure gold dust. Feeling humbled to be part of it, inspired to keep evolving the work. An extra special thank you to those who follow me, purchased a piece from me, just liked something and feedback, came to visit me, help me deal with me, flew in from Norway and made a special visit! You know who you are - and your support means a great deal. ❤️

@tom_demeranville is a vanguard of enthusiasm and

@tom_demeranville is a vanguard of enthusiasm and it was lovely to catchup today. Take care Tom, always a pleasure. @celebratingceramics bringing folks together 💫

Another sunny day @celebratingceramics come and vi

Another sunny day @celebratingceramics come and visit us here @waterperrygardens live music vibe 🤩

Creative, community, @celebratingceramics what a c

Creative, community, @celebratingceramics what a couple of days. Last day tomorrow. Come and visit at @waterperrygardens Oxfordshire. If you are there tomorrow come and say hi 💫

Load More... Follow on Instagram

Iain Shield

Abingdon, Oxfordshire

07818 430173

Iain@ShieldStudioPottery.com

Shield Studio Pottery would love to hear from you! We often attend local art events and Art Weeks when it’s on. You might find us firing local anagama kilns, or sourcing local clay. If you cant find us out and about we are probably on the wheel!

Proudly powered by WordPress | Theme: Sydney by aThemes.